testo Smart Probes Complete Set
Testo
€1,112.00*
Leasing is that simple!
Use the many advantages of leasing for your success. No more long trips to the bank and a decision within minutes.
Product number:
6620
EAN:
4029547024085
Similar products
GasPen digital
€349.00*
The gas leak detector "GasPen digital" is applicable for locating gas leaks on indoor and outdoor areas. With the movable sensor head you can also measure in unapproachable locations. Different types of gas can be identified. Setting options: - Methane (natural gas) - Propane - Hydrogen The gas sensor fitted in the sensor head, reacts to all flammable gases. The device is calibrated for methane. During the calibration process, results for propane and hydrogen are calculated. The measuring range starts with 0 ppm up to 22.000 ppm (2,2 Vol%). The results can be read continuously from the display. An acoustic signal is hearable at the same time. If needed, display can be illuminated. - Dimension: 25 x 45 x 136 mm - Flexible piece 160 mm - Weight: 145 g (incl. Battery) - Operating time: 12 hours - Battery LED Delivery contents GasPen light, plastic case, 2 x 1,5 V Battery, control certificate, manual
Gasspürgerät -GasPen light-
€199.00*
The gas leak detector "GasPen digital" is applicable for locating gas leaks on indoor and outdoor areas. With the movable sensor head you can also measure in unapproachable locations. The gas sensor fitted in the sensor head, reacts to Methane (CH4, natural gas). The measuring range starts with 100 ppm up to 10.000 ppm (1,0 Vol%). The results can be heard through an acoustic signal or/and 5 LEDs, which are assigned to particular gas concentration. - Dimension: 25 x 45 x 136 mm - Flexible piece 160 mm - Weight: 145 g (incl. Battery) - Operating time: 12 hours - Battery LED Delivery contents GasPen light, plastic case, 2 x 1,5 V Battery, control certificate, manual
Customers also bought
13.89
%
Material Humidity Measurement Device Testo 606-1
€93.00*
€108.00*
- For wood and building materials - Precise measurement of wood humidity (characteristic curves for different types of wood are saved on device) - Further saved characteristics: cement screed, concrete, gypsum, anhydrite screed, cement mortar, lime mortar
Customers also viewed
Material- & Air Humidity Measurement Device Testo 606-2
€192.00*
Integrated humidity measurement and NTC-air-thermometer. Range of application: Material humidity, Air humidity & Air temperature - Precise measurement of wood humidity (characteristic curves for different types of wood are saved on device) - Further saved characteristics: cement screed, concrete, gypsum, anhydrite screed, cement mortar, lime mortar, brick - HOLD-function for comfortable reading of the measured digits - Display lighting - Self test function - Protective cap - Measurement of temperature and humidity of the ambient air - incl. dew point calculation - TÜV approval: VDI 4206 Page 4 Delivery contents Belt bag, hand loop, protective cap, batteries and Calibration protocol